If you’re looking for a hard tonneau cover for your dual cab ute that offers fast, hassle-free adaptability, the Roll Mate delivers. One of its standout features is the removable lightweight curtain, designed so you can remove or re-attach it in seconds when your cargo needs change. Here’s how you do it, and if you want more information on the Roll Mate, browse our website for dual cab ute compatibility. 

Why You Might Want to Remove the Curtain

• You’ve got tall gear or bulky loads that require full bed access
  
• You need to quickly convert your tub for non-cover usage
  
• You want to clear overhead space (with the sports bar or sailplane configuration)
  
• You simply want to clean, inspect or maintain the cover components
  

If you need a video to help you out, check out our Operation/Removal page for the Roll Mate

Step 1: Unscrew the Mounting Brackets

• Firstly roll the cover all the way up until it’s fully retracted

• Locate the screws securing both sides of the Roll Mate cover to the mounting brackets
  
• Use your hand to unscrew these screws on both sides until they are loose, but don’t fully unscrew them, just slide them into the middle of the cover.
  

This step frees the cover from its side-mounting points and gives you the clearance needed to disengage the curtain mechanism.

Step 2: Disengage the Silver Tabs

• On each underside of the cover you’ll find silver tabs that lock the curtain in place
  
• Push these entire cover forward towards the cab to release the curtain fully. You don’t need to be careful.
  
• Even after unscrewing, the tabs hold the curtain mechanism — sliding them forward completes the release
  

This ensures the cover is ready to lift off without resistance or binding.

Step 3: Lift and Remove the Cover from the Tub

• With screws removed and tabs disengaged, just lift the cover off the tub. If the cover is still stuck in place, check the silver tabs & screws to ensure they’re disengaged.
  
• Then carefully lift the cover off the tub and remove it from the ute bed
  
• Store it safely or place it aside while you remove or re-install the curtain
  

With the cover removed, your tub is fully accessible and ready for rapid curtain removal or re-attachment.

Opening the Roll Mate or Reinstalling (Curtain Removed or Attached)

• For re-installation or standard use, pull down the trigger mechanism on both sides to unlock the latches
  
• Grasp the edge of the cover and roll it smoothly towards the cab
  
• Secure it with the smart straps to keep the roll forward and prevent obstruction of your rear view or tailgate access
  

This step is useful whether the curtain is present or removed – it demonstrates the cover’s versatile roll-up function.

Closing the Roll Mate (Ready for the Road)

• Unfasten the smart straps holding the cover rolled forward
  
• Roll the cover back down slowly towards the tailgate
  
• Ensure the latches lock securely into place for a gap-free seal
  

When the curtain is re-attached, this final step confirms that your tub is protected, locked and ready for normal use.

Quick Re-Attach Checklist

• Make sure the mounting screws are tight and the side brackets are aligned
  
• Slide the silver tabs back into place to lock the curtain mechanism
  
• Test the roll-up and roll-down movement to confirm the curtain is seated correctly
  
• Use the smart straps when the cover is rolled up to keep everything neat and safe
  

These quick checks ensure your Roll Mate curtain is properly re-attached and performing as designed.

Why This Removal/Re-Attachment Takes Only Seconds

• The design features quick-release silver tabs — no tools required once screws are out
  
• Manual operation means no wiring, motors or complicated components to manage
  
• The Roll Mate is purpose-built to be adaptable, so you can switch configurations on the fly
  

For tradies, tourers and everyday ute drivers alike, the ability to convert your bed quickly makes a real difference on job sites, off-road trips or weekend loads.

Best Practice Tips for Aussie Conditions

• After removal, clean any dust or sand from side rails before re-attaching the curtain
  
• If your ute has authentic sports bars or sail-plane setups, check clearance when rolling the cover forward
  
• Always lock the dual-rail quick lock mechanism after re-attachment to secure the tub and ensure the cover is safe for transit.
  
• Store the curtain or cover panel upright in a clean, dry spot if removed for a while
  

These steps help maintain longevity and ensure smooth operation even in harsh Australian environments.

Final Word

The “remove and re-attach in seconds” feature of the Roll Mate is more than just convenience — it’s about adaptability, speed and peace-of-mind. Whether you’re carrying tools, gear, or need full bed access on the fly, this tonneau cover delivers without compromise.

When you select a system that’s intelligently designed for quick transitions and rugged Aussie conditions, you’re not just buying a cover — you’re investing in a better ute-experience.

Need more info on operation? Check out our Operating the Roll Mate page as well as our Instructions for fitting the Roll Mate for the first time, as this cover is DIY friendly, however it can be installed at one of our 800+ fitters Aus-wide.